[Yak] Problems with SRAM three speed hub and clickbox

[Peter Saint James]

On 1  September2008, at 10:30 PM, Dave Charles wrote:

> I contacted BF and they in turn contacted SRAM. Both reported not  
> hearing of this problem before. BF suggested replacing the clickbox.


	Perhaps.  I would try replacing the pin and the plastic piece that  
goes on the pin before replacing the clickbox.

	I would also check to make sure I was putting that clickbox on tight  
enough when I put it on.  I'd also double-check to make sure that  
when I put the clickbox on, that the bike was in low gear.
	


								Peter