[Yak] Chain spacing on a Family Tandem
roamic at gmail.com
Fri Aug 20 12:12:29 CDT 2010
I may have asked this question before:
On our Family Tandem, on the rear crank, there is the chain guard; a
spacer; the outer chainring; the crank; the inner chainring; and a
Is the correct order of things?
The two chains clear by about a zillionth of an inch and sometimes rub.
I could move the inner chainring in by reversing it's position with
the 2nd spacer.
But this would mess up the alignment with the front chainring.
Should I use a narrower chain for the timing chain?
Should I move the inner chainring in on the rear with the spacer, and
also move the front chainring towards the center of the bike with a
More information about the Yak